Cino M230B - Manual (Page 171)

162
Programming Reference
VERSAJET
GS f
[Name] Select font for HRI characters
[Format] ASCII GS f n
Hex 1D 66 n
Decimal 29 102 n
[Range] n = 0, 1, 48, 49
[Default] n = 0
[Description] Selects a font for Human Readable Interpretation (HRI) characters when printing a bar code,
using n as follows:
n Font of HRI characters
0, 48 Font A
1, 49 Font B
[Notes]
The font set by this command is only effective for HRI characters.
HRI characters are printed at the position specified by GS H.
HRI character is Human Readable Interpretation character indicated with bar code.