Cino M230B - Manual (Page 215)

206
Programming Reference
VERSAJET
US 3
[Name] Auto tear-off control
[Format] ASCII US 3 n
Hex 1F 33 n
Decimal 31 51 n
[Range] 0≤ n ≤1
[Default] n = 0
[Description] Disable/Enable the paper-tearing position of the label by using auto tear-off setup.
n Function
0
Disable.
Motor will not move back
1
Enable.
Motor will move back and forward to locate
the tearing position of the label in the label
gap. The paper will be fed back to the next
printing position and start printing when
you execute the next print.