Da-Lite Da-Lift Pivot Motorized Projector Lift - Manual (Page 4)

4
2. Remove Trim piece from Da-Lift. See Figure 4. Save the fasteners.
3. Remove Universal Projector Mount from Da-Lift. See Figure 5.
Save the fasteners.
4. Secure Universal Projector Mount
to projector. See Figure 6.
Figure 4
Figure 5
Figure 6 Figure 7
Trim
Universal
Projector Mount
Projector
Nuts for Right to
Left Adjustment
Nuts for Fore and
AFT Adjustment
Procedure
5. Secure the projector and mount to the Da-Lift. Use the features
shown to adjust the projector’s position. See Figure 3 and 7.
Projector lens should not protrude past all-thread centerline.
6. Determine where the projector will be located and make a hole
in the ceiling and create a tile for the Da-Lift. See Figure 3 & 8.