Digi 9P 9360/9750 - Manual (Page 19)

1 9
R e q u i r e m e n t s
After modifying the exports file, the NFS server has to be restarted with the following
command:
JTAG-Booster
The JTAG-Booster software for hardware Flash updates is a DOS application. It must be
installed on a native DOS / Windows host or a virtual machine like "dosemu" under
Linux.
Execute "dosemu" as root to gain full hardware access. The configuration file of dosemu
needs the entry:
To install the JTAG-Booster software, copy the directory "hardware" from the CD to any
directory on the hard disk. This directory may also contain a file "Readme.txt" with the
latest instructions. Ensure that the parallel port is accessible for the application. If you are
using Microsoft Windows NT, 2000, or XP, you have to install the "Kithara DOS Enabler"
which is shipped on the LxNETES CD. A detailed manual can be found on the CD in the
folder "hardware".
# /etc/init.d/nfs-kernel-server restart
$_ports = "fast range 0x378 0x37a fast range 0x3f8 0x3ff range 0x778 0x77a”