Digi 9P 9360/9750 - Manual (Page 62)

6 2 L x N E T E S U s e r ’ s G u i d e
USB host interface
A USB host driver is included and enabled in the default kernel configuration. To operate
multiple USB devices simultaneously, connect a USB hub to the USB host port.
A memory stick can be mounted as followed
I2C interface
A driver for the I2C interface is included and enabled in the default kernel configuration.
Devices attached to the I2C interface can be accessed via /sys/bus/i2c/device/<your
device>.
SPI interface
A driver for the SPI interface is included and enabled in the default kernel configuration.
It can be accessed via /sys/bus/spi/device/<your device>.
LCD interface
A LCD frame buffer driver is included and enabled in the default Linux kernel
configuration.
Touch screen interface
CC9P9360/9750
A driver for the touch controller on the LCDMODARM development board, which is
connected via SPI, is included and enabled in the default Linux kernel configuration.
# lxmount usb
# ls -l /media/usbdisk