Ditch Witch FXT60 - Manual (Page 121)

Service - 120
FX60/FXT60 Tier 4 Operator’s Manual
As Needed
CMW
®
Debris Tank
Clean Primary Shutoff Valve
Clean primary shutoff valve as needed. Replace
primary shutoff valve as needed.
To clean:
1. Open tank door. See “Open/Close Tank Door”
on page 78.
2. Spray valve housing inside vacuum tank with
high-pressure water.
3. Store water pressure hose.
4. Close tank door. See “Open/Close Tank Door”
on page 78.
To remove:
1. Loosen three wingnuts (1) and pull out valve housing (2).
2. Remove ball (3).
3. Clean ball and housing with high-pressure water.
4. Replace ball and housing.
5. Tighten wingnuts.
22
33
11
j35om027h.eps j35om027h.eps