Ditch Witch FXT60 - Manual (Page 72)

FX60/FXT60 Tier 4 Operator’s Manual
Vacuum and Pothole - 71
Remove Debris
CMW
®
Remove Debris
Procedure
1. Position vacuum hose in area to be excavated.
2. Start engine.
3. Open inlet valve if necessary to begin excavation.
4. Use sight glasses to monitor debris level in tank. Vacuum will shut off when tank is full but always heed
trailer and tank lifting capacities as indicated on page 67. Engine will remain running.
EMERGENCY SHUTDOWN: Turn ignition switch to STOP.
Vacuum can suffocate. Keep hose end away from
face.
273-205
Fire or explosion possible. Do not vacuum
flammable or combustible substances. 273-483
Read operator’s manual. Know how to use all
controls. Your safety is at stake.
273-475
To help avoid injury: Do not excavate hazardous or toxic materials. Unit is designed to excavate
only soil cuttings, drilling fluids, and other non-toxic waste.