Ditch Witch FXT60 - Manual (Page 87)

Service - 86
FX60/FXT60 Tier 4 Operator’s Manual
Service Precautions
CMW
®
Service Precautions
Working Under Raised Debris Tank
If using 800:
1. Raise vacuum tank.
2. Remove cylinder lockout tool and place over extended cylinder rod.
3. Lower vacuum tank until load is supported by cylinder lockout tool.
If using 1200:
1. Raise vacuum tank.
2. Pull spring-loaded pin and rotate tank support leg down until pin clicks
into hole.
3. Lower vacuum tank until load is supported by tank support leg.
Read operator’s manual. Know how to use all controls.
Your safety is at stake. 273-475
To help avoid injury:
• Unless otherwise instructed, all service should be performed with engine off.
Refer to engine manufacturer’s manual for engine maintenance instructions.
IMPORTANT: Service illustrations show unit configured with 1200-gal (4542-L) tank unless indicated
otherwise.
Crushing weight. Place cylinder lock on extended cylinder
and secure. 273-231
800
FX_Tank_Raised.eps FX_Tank_Raised.eps
1200