Approved coolant, Engine oil temperature chart, Rt100 powershift operator’s manual – Ditch Witch RT100 User Manual
Page 108
RT100 Powershift Operator’s Manual
Service - 107
Recommended Lubricants/Service Key
Approved Coolant
This unit was filled with John Deere Cool-Gard coolant before shipment from factory. Add only John Deere
Cool-Gard II (p/n 255-006) or any fully-formulated, low-silicate, ethylene glycol based, heavy-duty diesel
engine coolant meeting ASTM specification D6210.
Engine Oil Temperature Chart
NOTICE: Do not use water or automotive-type coolant. This will lead to engine damage or premature
engine failure.
To help avoid injury:
•
Unless otherwise instructed, all service should be performed with engine off.
•
Refer to engine manufacturer’s manual for engine maintenance instructions.
•
Before servicing equipment, lower unstowed attachments to ground.
t37om047w.eps
SAE 0W-30
SAE 0W-40
SAE 5W-30
SAE 5W-40
SAE 10W-30
SAE 10W-40
SAE 15W-40
SAE 20W-50
Temperature range anticipated before next oil change