Ditch Witch RT100 - Manual (Page 143)

Service - 142
RT100 Powershift Operator’s Manual
As Needed
8. Loop cable through links nearest connector
pin.
9. Loosen plug on grease cylinder to relieve chain tension.
10. Stand clear of chain and remove lock key from connector pin. Drive connector pin out of link.
11. Unclamp links. Slowly release cable and lower chain to ground.
12. Lay chain on ground with teeth down.
Fluid pressure could pierce skin and cause injury or death. Stay
away.
To help avoid injury: Service digging boom grease cylinder only while standing on opposite
side of boom. Wear gloves and safety glasses, and cover fitting with cloth when relieving
pressure in cylinder.
Crushing weight could cause death or serious
injury. Use proper procedures and equipment or stay away.