Operating tips – Ditch Witch RT115 User Manual

Page 126

Advertising
background image

RT115 Tier 3- SAW ATTACHMENT

OPERATING TIPS

126

RT115 Tier 3 - SAW ATTACHMENT

OPERATING TIPS

OPERATING TIPS

•

Work slowly and carefully.

•

Wash bits and mounting blocks with high pressure water
before parking unit overnight.

•

Before operating saw, check bits for free rotation. Tap bits
lightly with a hammer and turn by hand. If bits are stuck,
remove and clean packed soil from bit block.

•

For best results, use retaining clip loading and removing tool
and a knock-out bar included with saw to remove and reinsert
bits.

•

Carbide bits are recommended for cutting abrasive material,
such as sandstone or frozen sands or gravels.

•

Saw use is not recommended for soft, wet, or sticky soil
conditions.

•

Lower saw into softer material then move into harder or
abrasive material. For example, lower saw into dirt at shoulder
before cutting across road.

•

If a curved trench must be cut, make a series of straight cuts.

EMERGENCY SHUTDOWN - Turn ignition switch to STOP.

OPERATING TIPS

•

Work slowly and carefully.

•

Wash bits and mounting blocks with high pressure water
before parking unit overnight.

•

Before operating saw, check bits for free rotation. Tap bits
lightly with a hammer and turn by hand. If bits are stuck,
remove and clean packed soil from bit block.

•

For best results, use retaining clip loading and removing tool
and a knock-out bar included with saw to remove and reinsert
bits.

•

Carbide bits are recommended for cutting abrasive material,
such as sandstone or frozen sands or gravels.

•

Saw use is not recommended for soft, wet, or sticky soil
conditions.

•

Lower saw into softer material then move into harder or
abrasive material. For example, lower saw into dirt at shoulder
before cutting across road.

•

If a curved trench must be cut, make a series of straight cuts.

EMERGENCY SHUTDOWN - Turn ignition switch to STOP.

Advertising