Ditch Witch RT115 User Manual

Page 23

Advertising
background image

RT115 Tier 3 - CONTROLS

23

CONTROL CONSOLE DESCRIPTIONS

RT115 Tier 3 - CONTROLS

23

CONTROL CONSOLE DESCRIPTIONS

Operator Alert Indicator

This indicator alerts operator to
Tier 3 engine fault conditions.

•

Light flashes when a "warning"
fault is present.

•

Light is steady when "engine
shutdown" fault is present.

Cold Start Wait Indicator

This indicator lights when intake
air pre-heater is operating.

If lamp is on, wait until lamp goes
out before starting engine.

IMPORTANT: For more information about the diagnostic
system and trouble codes see "Tier 3 Service Overview" in
SERVICE.

IMPORTANT:

•

If ignition key is turned to START before wait lamp goes
out, the system is disabled and must be reset.

•

Turn ignition key to OFF, then to RUN to reset.

Operator Alert Indicator

This indicator alerts operator to
Tier 3 engine fault conditions.

•

Light flashes when a "warning"
fault is present.

•

Light is steady when "engine
shutdown" fault is present.

Cold Start Wait Indicator

This indicator lights when intake
air pre-heater is operating.

If lamp is on, wait until lamp goes
out before starting engine.

IMPORTANT: For more information about the diagnostic
system and trouble codes see "Tier 3 Service Overview" in
SERVICE.

IMPORTANT:

•

If ignition key is turned to START before wait lamp goes
out, the system is disabled and must be reset.

•

Turn ignition key to OFF, then to RUN to reset.

Advertising