Approved coolant – Ditch Witch RT115 User Manual

Page 150

Advertising
background image

RT115 Tier 3- SERVICE

APPROVED COOLANT

150

RT115 Tier 3 - SERVICE

APPROVED COOLANT

APPROVED COOLANT

This unit was filled with John Deere Cool-Gard coolant before
shipment from factory. Add only John Deere Cool-Gard (p/n 255-
006) or any fully-formulated, ethylene glycol based, low-silicate,
heavy-duty diesel engine coolant meeting ASTM specification
D5345 (prediluted) or D4985 (concentrate) and containing
supplemental coolant additives (SCAs) meeting John Deere
specification JDM H24A2.

NOTICE: Do not use water or high-silicate automotive-type
coolant. This will lead to engine damage or premature engine
failure.

NOTICE: Do not mix heavy-duty diesel engine coolant and
automotive-type coolant. This will lead coolant breakdown and
engine damage.

Incorrect procedures could

result in death, injury, or property damage. Learn
to use equipment correctly.

NOTICES:

•

Unless otherwise instructed, all service should be
performed with engine off.

•

Refer to engine manufacturer’s manual for engine
maintenance instructions.

•

Before servicing equipment, lower unstowed attachments
to ground

APPROVED COOLANT

This unit was filled with John Deere Cool-Gard coolant before
shipment from factory. Add only John Deere Cool-Gard (p/n 255-
006) or any fully-formulated, ethylene glycol based, low-silicate,
heavy-duty diesel engine coolant meeting ASTM specification
D5345 (prediluted) or D4985 (concentrate) and containing
supplemental coolant additives (SCAs) meeting John Deere
specification JDM H24A2.

NOTICE: Do not use water or high-silicate automotive-type
coolant. This will lead to engine damage or premature engine
failure.

NOTICE: Do not mix heavy-duty diesel engine coolant and
automotive-type coolant. This will lead coolant breakdown and
engine damage.

Incorrect procedures could

result in death, injury, or property damage. Learn
to use equipment correctly.

NOTICES:

•

Unless otherwise instructed, all service should be
performed with engine off.

•

Refer to engine manufacturer’s manual for engine
maintenance instructions.

•

Before servicing equipment, lower unstowed attachments
to ground

Advertising