DuraVent FasNSeal 8090 Installation User Manual
Page 2
A MAJOR CAUSE OF VENT RELATED FIRES IS FAILURE
TO MAINTAIN REQUIRED CLEARANCES (AIR SPACES)
TO COMBUSTIBLE MATERIALS. IT IS OF THE UTMOST
IMPORTANCE THAT DURAVENT PRODUCTS
BE INSTALLED
ONLY IN ACCORDANCE WITH THESE INSTRUCTIONS.
Dear Customer, Installer, or End User:
We welcome any comments regarding
matters pertaining to our DuraVent products.
We welcome any ideas, input or complaints
to help improve our product offering.
If you are searching for tech support or
product information, please phone us at
800-835-4429.
Or email us at:
•
Examine all components for possible
shipping damage prior to installation;
•
Read all instructions before beginning
the installation and follow these
instructions exactly as written.
•
Proper joint assembly is essential for a
safe installation. Check the integrity of
ALL joints upon completion of assembly
•
This venting system must be free to
expand and contract under normal
operation.
•
Assure unrestricted vent movement
where required through walls, ceilings
and roof penetrations.
•
This venting system must be supported
in accordance with these instructions.
•
Do not mix pipe, fittings, or joining
methods from different vent system
manufacturers. Do not use adhesives
of any kind with this venting system.
Acceptance of the installed system is
dependant on full compliance with
these installation instructions.
WARNING
Risk of carbon monoxide poisoning
or fire due to joint separation or pipe
breakage.
Keep these instructions for future
reference.
WARNING
CARBON MONOXIDE POISONING
HAZARD. Failure to follow the steps
outlined below for each appliance
connected to the venting system being
placed into operation could result in
carbon monoxide poisoning or death.
LISTED
MH6357