Easyrig 5 Vario - Manual (Page 5)

5
Fig. 1
Unlatch the buckle and unfold the support arm.
Fig. 2
Let the tube attatched to the support arm slide
into the lower tube section and pull over the
bellows.
Fig. 3
With the Easyrig vario 5 firmly sitting on ground,
attach the camera to the hook. Check to make
sure the camera is supported properly.
• If the tension is incorrect to support your
camera weight, continue to step 4a.
• If the tension is correct to support your camera
weight, continue to step 6.
Fig. 4
Locate the adjustment Allen-key 6mm tool
behind the Easyrig vario 5 cover and pull it out.
1
2
4a
5
Getting started with
the Easyrig Vario 5