Echelon Neuron - Manual (Page 139)

Neuron Tools Errors Guide 131
NEX# Description
50 The transceiver's general purpose data record seems malformed: <gp data>
[NEX#50]
The transceiver’s general-purpose data record seems malformed. Verify
that your standard transceiver database (stdxcvr.xml) has not been
corrupted. An update might be available from the www.lonmark.org
website.
51 The device's clock rate (encoded value <id>) and the transceiver's
communication rate (encoded value <id>) result in an invalid communication
clock divider value. One of the two input rates might be invalid [NEX#51]
The device's clock rate and the transceiver’s communication rate result in
an invalid communication clock divider value. One of the two input rates
might be invalid. See the error message for failure details. Try increasing
or lowering the Neuron clock speed.
52 The transceiver requires a minimum clockrate which is higher than the device's
configured input clock speed [NEX#52]
The transceiver requires a minimum clock-rate that is higher than the
device's configured input clock speed. This combination cannot be used;
you must choose a higher clock rate or a different transceiver.
53 The encoded value for the device's clock input of <id> is not within the
supported range of <min> to <max> [NEX#53]
The encoded value for the device’s clock input is not within the supported
range. See error message for failure details.
54 The encoded value for the channel's minimum clock rate of <id> is not within
the supported range of <min> to <max> [NEX#54]
The encoded value for the channel's minimum clock rate of <id> is not
within the supported range. See error message for failure details. Verify
that your standard transceiver database (stdxcvr.xml) has not been
corrupted. An update might be available from the
www.lonmark.org
website.
55 Unable to determine preamble length using transceiver <xcvr> [NEX#55]
Unable to determine the preamble length. See error message for failure
details. Verify that your standard transceiver database (stdxcvr.xml) has
not been corrupted. An update might be available from the
www.lonmark.org website.
56 Unable to determine packet cycle duration using transceiver <xcvr> [NEX#56]
Unable to determine the packet cycle duration. See error message for
failure details. Verify that your standard transceiver database
(stdxcvr.xml) has not been corrupted. An update might be available from
the www.lonmark.org website.