Echelon FTXL User Manual

Page 250

Advertising
background image

238

LonTalk Interface Developer Utility Error and Warning Messages

LID#

Description

4009

Warning code not in use.

4010

Warning code not in use.

4011

The .NCT file references a built-in type with no host equivalent

known to LonTalk Interface Developer utility

This condition is unlikely to occur and does report an internal error.

Check

www.echelon.com

for available software updates that address

the problem, or contact

[email protected]

. This message is a

warning rather than an error because the condition does not prevent

your application from working. Carefully check the type definitions
provided in LonNvTypes.h and LonCpTypes.h (both generated by

LonTalk Interface Developer utility) and correct the offending type.

Continue using these files and build your FTXL device.

4012

Warning code not in use.

4013

Warning code not in use.

4014

Explicit addressing specified but not required

This warning reminds you that you have requested support for

explicit addressing, although it does not seem to be required. Explicit

addressing requires larger buffers on the host, therefore support for
explicit addressing is advisable only when needed. Message tag

declarations that are intended for use with explicit addressing should
be marked with the bind_info(nobind) modifier to signal the use of

explicit messaging. See also the LID#4013 and LID#4015 warnings.

4015

Explicit addressing specified but neither supported nor required
Although support for explicit addressing has been requested, it does

not appear to be required. See also the LID#4013 and LID#4014
warnings.

4016

FTP implementation suspect -- no message tag but SNVT_file_*
implemented
The implementation of the file transfer protocol is suspect, as the

FTP-related network variables are present but no message tag has
been declared.

4017

Files cannot be made writable

When the LonTalk Interface Developer utility creates the host

framework, it produces several files based on input provided by the
user. It copies the necessary files into the destination folder. These

files are made writable after they are copied, unless this warning

indicates it is not possible. See also the LID#4006 warning.

4018

Warning code not in use.

Advertising