Echelon LNS - Manual (Page 363)

LNS Programmer's Guide 349
names of all networks in the Networks, RemoteNetworks or
VNINetworks collections, as dictated by the client type selected in step 1.
If Server Independent was selected, the VNINetworks collection is
used. If Remote Full client using Remote Networks Collection was
selected, the RemoteNetworks collection is used. In all other cases, the
Networks collection is used.
For source code information, see
CLcaMonitorDlg::OnSelchangeNetworkName() in the
LcaMonitorDlg.cpp file.
4. Once you have selected a network, click the Monitor button to begin
monitor and control operations. Note that the Locale field contains the
FormatLocales collection included with the example. This field is static
and read-only.
5. When you click the Monitor button, the dialog shown in Figure C.4
opens.
Figure C.4 Monitor Set Dialog
6. Click the Temporary Monitor Set button to perform monitor and
control operations with temporary monitor sets, or the Permanent
Monitor Set button to perform monitor and control operations with
permanent monitor sets. See Chapter 9 of this document for an overview
of the differences between the two types of monitor set.