Project #b1 mobile radio, Project #b2 mobile launcher, Bonus circuits for snap circuits – Elenco Deluxe Snap Rover® User Manual
Page 46: Owners
-45-
Project #B1
Mobile Radio
BONUS CIRCUITS FOR SNAP CIRCUITS
®
OWNERS
If you own Snap Circuits
®
Models SC-300, SC-500, or SC-750 (with 300+ experiments), then you may also build these circuits.
Our website (www.snapcircuits.net) has additional circuits. DO NOT use parts from other Snap Circuits
®
kits with your Snap
Rover
®
except in our approved circuits - the Snap Rover
®
uses higher voltage which could damage those parts.
Tune the variable capacitor
(CV) to a local radio station
and set the volume using the
adjustable resistor (RV). Use
the remote control levers to
drive Rover around.
The remote control activates the
disc launcher (DL) and spins the fan
(M1). Sometimes the fan may fly off.
C
h
a
n
n
e
l
sw
itc
h o
n remote
co
n
tr
o
l
u
n
it.
+
!
WARNING:
Moving parts.
Keep face and eyes away
from the front of the disc
launcher and from flying
discs.
!
WARNING:
Moving parts.
Do not touch the fan or
motor during operation.
!
WARNING:
Do not lean
over the motor.
R
O
VER REAR
Project #B2
Mobile Launcher
C
h
a
n
n
e
l
sw
itc
h o
n remote
co
n
tr
o
l
u
n
it.
R
O
VER REAR
+
+