Denon DVD-1800BD - Manual (Page 18)

14
Playback
ENGLISH
ENGLISH
Playback
Ⅵ HDMI CEC
HDMI CEC allows integrated system control over HDMI and is part
of the HDMI standard.
In addition to DENON AV components, it allows interoperability
with CEC- compatible AV components and TVs made by other
manufacturers. This function may not work properly depending
on a device to be connected.
To set “HDMI CEC”, press [SETUP], then select “Custom”
A
“Others” A “HDMI CEC”.
When “HDMI CEC” setting is set to “On”, functions listed below will
be available.
One Touch Play
When this unit is turned on, the connected devices are also turned
on and the appropriate external input source will be selected
automatically. The appropriate external input source can also be
selected automatically, when you press B when the unit’s power
is on.
Standby
When the connected HDMI CEC compatible display device is
turned off, this unit may also turn off together.
A
[U / V / Y / Z]
C
[POWER ON]
B
[ENTER]
A B C
<ON/STANDBY>
[POWER OFF]
About the button names in this explanation
< >: Buttons on the main unit
[ ] : Buttons on the remote control
Button name only:
Buttons on the main unit and remote control
Direct Playback
1 Press <ON/STANDBY> or [POWER ON].
This indicator lights up in red in standby mode and
turns off when the power is on.
2 Turn on the display device and select the
appropriate input on the device to which the unit
is connected. (HDMI CEC)
3 Press A to open the disc tray.
4 Place the disc on the disc tray with its label side
facing up.
5 Press A to close the disc tray.
Some discs may start playback automatically.
6 Press B to start playback.
For many of BD-video and DVD-video, a menu screen
may appear.
In this case, use [U / V / Y / Z] to select the desired
item, then press [ENTER].
7 Press C once to stop playback temporarily.
Refer to “Resume Playback” on page 16.
To eject the disc:
Press A to open the disc tray, then remove the disc
before turning off the unit.
DVD-V DVD-VR CD BD-V
Align the disc to the
disc tray guide.
It may take a while to load the disc.
Note
• Power continues to be supplied to some of the circuitry even
when the power is in the standby mode. When leaving home
for long periods of time or when traveling, unplug the AC
cord from the AC outlet.
• may appear at the top-right on the screen when the
operation is prohibited by the disc or this unit.
• During the playback of 2-layered disc, pictures may stop for a
moment. This happens when the 1st layer switches to the
2nd layer. This is not a malfunction.
• The operation may vary when you play back BD/DVD with
disc menu. Refer to the manual accompanying the disc for
details.
• HDMI CEC is available only when the display device is
connected by an HDMI cable, and when it supports HDMI CEC
feature.
E5H60UD_EN.book Page 14 Thursday, August 21, 2008 1:54 PM