Denon DVD-1800BD - Manual (Page 41)

37
Function Setup Function Setup
ENGLISH
ENGLISH
Initialize the setting or SD Memory Card.
1) Press [SETUP] in stop mode.
2) Use [Y / Z] to select “Initialize”, then press [ENTER].
3) Use [U / V] to select a desired option, then press [ENTER].
“No” : Exit without any initialization.
“Setup” : Reset the SETUP setting to the factory default.
“Memory Device” : Initializes the SD Memory Card. After confirmation message appears, use
[U / V] to select “Yes”, then press [ENTER].
4) Press [ENTER]. (for “Setup” and “Memory Device” only)
5) Press [SETUP] to exit.
Setting items Options
Closed Caption
Sets whether display the closed
caption or not using the caption
decoder (commercially available ). On
Off*
Remote Control Setting
Changes the signal code of a
remote control. (Refer to page 6) DENON1*
DENON2
HDMI CEC
Sets whether to utilize the HDMI
CEC function. (Refer to page 14) On*
Off
Media Select
Select the media to playback. Disc*:
Select this when you play back a disc.
SD Memory:
Select this when you play back a SD Memory Card.
Initialize
Note
• The setting for “Ratings” will not be reset.
Initialize
Initialize?
No
Setup
Memory Device
E5H60UD_EN.book Page 37 Thursday, August 21, 2008 1:54 PM