Basic hints and tips, Basic hints and tips -2 – Eurocom D900T PHANTOM User Manual

Page 132

Advertising
background image

Troubleshooting

8 - 2 Basic Hints and Tips

8

Basic Hints and Tips

Many of the following may seem obvious but they are often the solution to a problem when your computer
appears not to be working.

Power - Is the computer actually plugged into a working electrical outlet? If plugged into a

power strip, make sure it is actually working. Check the LED Power Indicators (see

“LED

Indicators” on page 1 - 6

) to see the computer’s power status.

Connections - Check all the cables to make sure that there are no loose connections anywhere.

Power Savings - Make sure that the system is not in Hibernate or Standby mode by pressing the

keys configured in your Power Management/Power Options (see

“Configuring the Power But-

ton” on page 3 - 8

), the Fn + F4 key combination, or power button to wake-up the system.

Brightness - Check the brightness of the screen by pressing the Fn + F8 and F9 keys to adjust

the brightness (see

“Keyboard Video Controls” on page 3 - 2

).

Display Choice - Press Fn + F7 to make sure the system is not set to “external only” display (see

“Keyboard Video Controls” on page 3 - 2

).

Boot Drive - Make sure there are no floppy disks in any connected drive when you start up your

machine (this is a common cause of the message “Invalid system disk - Replace the disk, and
then press any key
” / “Remove disks or other media. Press any key to restart”).

Advertising