Eurocom D900T PHANTOM - Manual (Page 166)

ATI Video Driver Controls
C - 4 Display Devices
C
Display Devices
Besides the built-in LCD, you can also use an external monitor/flat panel dis-
play or TV/HDTV as your display device. The following are the display op-
tions:
1. The built-in LCD.
2. An external monitor connected to the DVI-Out port (may require DVI to VGA
converter).
3. A flat panel display connected to the DVI-Out port (may require DVI to VGA
converter).
4. A TV/HDTV (HDTV requires an HDTV converter) connected to the S-Video
Out port.

Theater Mode
Theater Mode can be
enabled by clicking
Clone Mode Options
(button) in the Overlay
tab from the ATI Mobil-
ity Radeon Properties.
(see page
C - 3 ). The-
ater Mode enables you
to display video play-
back in full screen on a
secondary monitor.
Theater Mode is not
supported if you have
the TV Tuner module
installed.

Monitor and TV Tuner
If you are connecting both a monitor/flat panel display to the DVI-Out port, and a
cable/aerial to the optional TV Tuner module, make sure you attach the cable/
aerial to the TV Tuner first, then the monitor.