Eurocom D90xC PHANTOM-X - Manual (Page 184)

Windows XP Information
D - 12 Attaching Other Displays
D
Attaching Other Displays
1. Attach your external display to the external monitor port/DVI-Out Port (or TV to the S-
Video-Out jack), and turn it on.
2. Go to NVIDIA Control Panel (see “Video Features” on page B - 7 ).
3. Click Set up multiple displays (Display).
4. Select the display mode and displays you want to use from the menu.
5. Select the Primary display if you are using Dualview Mode.
6. Click Apply (and Yes to confirm the settings change).
Figure D - 9 - Set Up Multiple Displays

Function Key
Combination
You can use the Fn +
F7 key combination to
toggle through the dis-
play options:
• Notebook Only
• External Display
Only
• Notebook + External
Display
Make sure you give the
displays enough time
to refresh.
Detect Displays
To get a full range of dis-
play options click “My
display is not shown
in the list...”.

SLI Configuration &
Multiple Displays
Note that if SLI configu-
ration is enabled only a
Single display may be
used as the display de-
vice.