The setup program, Entering setup, The setup program -4 – Eurocom D90xC PHANTOM-X User Manual
Page 78: Entering setup -4
Advertising
BIOS Utilities
5 - 4 The Setup Program
5
The Setup Program
The Phoenix Setup program tells the system how to configure itself and manage ba-
sic features and subsystems (e.g. port configuration).
Entering Setup
To enter the PhoenixBIOS Setup Utility, turn on the computer and press F2 during
when you see the prompt "Press F2 to Enter Setup", which is usually present for a
few seconds after you turn on the system. If you get a “Keyboard Error”, (usually
because you pressed F2 too quickly) just press F2 again.
If the computer is already on, reboot using the Ctrl + Alt + Delete combination and
then hold down F2 when prompted. The Setup main menu will appear.
Advertising