EXFO FPM-300 Power Meter - Manual (Page 9)

FPM-300/FLS-300/FOT-300 4
2 Safety Information
Electrical Safety Information
Laser Safety Information
(FLS-300 and FOT-300)
Your instrument is a Class 1 laser product in compliance with standards IEC 60825-1
and 21 CFR 1040.10. Laser radiation may be encountered at the output port.
The following label indicates that a product contains a Class 1 source:
I
MPORTANT
When you see the following symbol on your unit , make sure
that you refer to the instructions provided in your user
documentation. Ensure that you understand and meet the required
conditions before using your product.
W
ARNING
Use the AC adapter provided with this product
indoors only.
W
ARNING
Do not use the unit outdoors in wet locations.
W
ARNING
Use of controls, adjustments and procedures for operation and
maintenance other than those specified herein may result in
hazardous radiation exposure.
W
ARNING
Do not install or terminate fibers while a laser source is active. Never
look directly into a live fiber and ensure that your eyes are protected
at all times.
QST519
A
150 mA
6 -16 V DC