EXFO PM-1600 High-Speed Power Meter - Manual (Page 136)

Remote Control (SCPI) Commands
126 PM-1600
Specific Commands
SENSe:CORRection:COLLect:ZERO
Description This command performs an offset nulling measurement (on the
currently selected channel when using a PM-1620). If light is
detected, the “Light detected” error message is raised. If this
command is sent while an acquisition is in progress, the
“Acquisition already running” error message will be raised.
Syntax SENS:CORR:COLL:ZERO
Example SENS:CORR:COLL:ZERO
Remote Control (SCPI) Commands
126 PM-1600
Specific Commands
SENSe:CORRection:COLLect:ZERO
Description This command performs an offset nulling measurement (on the
currently selected channel when using a PM-1620). If light is
detected, the “Light detected” error message is raised. If this
command is sent while an acquisition is in progress, the
“Acquisition already running” error message will be raised.
Syntax SENS:CORR:COLL:ZERO
Example SENS:CORR:COLL:ZERO