EXFO PM-1600 High-Speed Power Meter - Manual (Page 79)

Controlling the PM-1600 Automatically or Remotely
High-Speed Power Meter 69
Communication Parameters
Communication Parameters
For GPIB Communication
Terminate Read on EOS a
a. “End of String”
Yes
Set EOI b with EOS on Writes
b. “End or Identify”
Yes
Type of compare on EOS 8-bits
EOS byte 0Ah
Send EOI at end of Writes Yes
GPIB primary address See page 68
GPIB secondary address None
For RS-232 Communication
EOS bytes 0Ah
Baud rate 9600 bps
Parity None
Data bits 8 bits
Stop bits 1 bit
Flow control None
Activation See page 68
Controlling the PM-1600 Automatically or Remotely
High-Speed Power Meter 69
Communication Parameters
Communication Parameters
For GPIB Communication
Terminate Read on EOS a
a. “End of String”
Yes
Set EOI b with EOS on Writes
b. “End or Identify”
Yes
Type of compare on EOS 8-bits
EOS byte 0Ah
Send EOI at end of Writes Yes
GPIB primary address See page 68
GPIB secondary address None
For RS-232 Communication
EOS bytes 0Ah
Baud rate 9600 bps
Parity None
Data bits 8 bits
Stop bits 1 bit
Flow control None
Activation See page 68