EXFO BV10 Performance Endpoint Unit - Manual (Page 72)

CLI Command Reference
66 BV10
Configuration Commands
interface lan duplex half|full
Description Sets the LAN duplex to either half or full; no auto-negotiation is
performed.
This command cannot be sent through the Test port.
Syntax interface lan duplex half | full
Example bv10-100> interface lan duplex full
interface lan flow auto
Description Auto-negotiates the flow control for the LAN port to either receive (rx)
or none.
This command cannot be sent through the Test port.
Syntax interface lan flow auto
Example bv10-100> interface lan flow auto
interface lan flow rx|none
Description Sets the flow control for the LAN port to the receive (rx) or none; no
auto-negotiation is performed.
This command cannot be sent through the Test port.
Syntax interface lan flow rx|none
Example bv10-100> interface lan flow rx