EXFO IQS-8500 Series for IQS-600 - Manual (Page 130)

Creating and Starting a Test Case
116 FTB-8500 Series and FTB-8120NGE/8130NGE
Fibre Channel BERT Test Case
Fibre Channel BERT Test Case
Typical Fibre Channel BERT application in Single Port:
Typical BERT application in Dual Ports:
To create a Fibre Channel test:
1. Test configuration:
1a. Select Fibre Channel as the Interface
Type. Fibre Channel is only available
with BERT test.
1b. For IQS-8510B: Select the Topology test
type: Single Port or Dual Ports.
1c. Select BERT as the Application Type.
1d. Press Next.