EXFO IQS-8500 Series for IQS-600 - Manual (Page 431)

Tools Tabs
Ethernet and Fibre Channel Application 417
Traffic Scan
Traffic Scan
The traffic scan tool provides the capability to discover and monitor VLAN
or MPLS traffic flows on the network.
Note: In order to access traffic scan, a test must be created but not running. If the
test is started while the traffic scan is running, the traffic scan will
automatically stops.
Press Tools, and Traffic Scan.
Scan
Starts/stops the traffic scan test.
Mode
Allows the selection of VLAN or MPLS traffic scan mode. The default
setting is VLAN.