EXFO IQS-8500 Series for IQS-600 - Manual (Page 518)

Pop-Up Windows
504 FTB-8500 Series and FTB-8120NGE/8130NGE
Ping
Ping
The Ping is used to determine if a network device is reachable.
Note: The Ping button is not available when an RFC 2544 test is running, or when
a Ping or Trace Route command is running (refer to Ping Configuration on
page 396).
Press TEST, Stream Gen, IP, and Ping.

Results: Refer to Ping Results on page 398 for more information.

Statistics: Refer to Statistics on page 404 for more information.

OK: Press OK to exit the Ping/Trace Route window.
Configuration

Timeout (ms): Enter the maximum time allowed between an ICMP
echo and response. Choices are 200 ms to 10000 ms. The default
setting is 4000 ms.
IPv4
IPv6