FeiYu Tech FY-AHRS-2000B - Manual (Page 4)

Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyudz.cn [email protected]
- 4 -
There is a message shown in the status box if change successfully. And only by writing
successfully can you save completely.
Disconnect the AHRS connected cable, and reconnect, then power on the module:
Click the “Close” button to close the Com Port, choose “115200” as the Baud Rate.(shown as
below)
Then click the “Open” button to reopen the port, the refresh data is shown on the left box.