Glow-worm Clearly Solar System Hydraulics - Manual (Page 11)

11
4 Installation
Make sure that you have all the components required, see
diagram 4.1, 4.2 and tables 4.1 and 4.2, below.
4.1 Recommended installation sequence
Assuming that the cylinder and collectors are fitted with
the exception of the solar system hydraulics and wiring, it
is recommended that the solar pump station is now fitted
followed by the solar circuit pipework.
The cylinder and collectors must be installed in accordance
with the separate installation instructions.
Proceed with the installation as described in the following
sections and shown in the diagrams 4.3 and 4.4 .
14172
Diagram 4.1 Solar set items
Item Description
1
Solar collector panel
2 On-roof, In-roof or Flat roof kit
3 Solar pump unit
4 Fluropro solar control
5 Roof bracket set, concrete tiles
6 Solar fluid (20 litre)
7 Automatic air separator
8 Expansion vessel
9 Protection vessel
Item Description
1
Single insulated tube DN16 15m x 2
2 Fittings pack for DN16 tube
Table 4.2 Optional pipework kit
Table 4.1 Typical solar items
14351
Diagram 4.2
Optional pipework kit items
1
2
3
4
5
8
6
9
7
1 2