Glow-worm Clearly Solar Horizontal In-Roof Collector - Manual (Page 15)

15
Diagram 5.15
14966
5.5 Flexible flashing
Remove the protection film from the adhesive surface of the
flexible flashing.
NOTE: Ensure that the adhesive surface is dry and free from
dust and grease.
Contour the flexible flashing to the tile shape, see diagram
5.15.
Stick the flexible flashing to parts that overlap.
5.6 Sealing strip
Attach the self adhesive sealing strip on the side sections of
the collector frame as shown in diagram 5.16 and also on the
ridge plates, see diagram 5.17.
If necessary carefully cut the sealing strip with a trimming knife.
14968
OVERLAP
FLEXIBLE
FLASHING
14968
Diagram 5.16
Diagram 5.17
SEALING
STRIP
SEALING STRIP
5 Single Collector Flashing Kit - 22 0 - 75 0