Introduction, En introduction – Glow-worm Clearly Solar Collector Container User Manual

Page 4

Advertising
background image

0020147746_00 - 03/12 - Glow-worm

- 2 -

INTRODUCTION

EN

INTRODUCTION

1

Notes on the documentation

1.1

Symbols used

The symbols used in the text are explained below:

Symbol

Explanation

Symbol that denotes useful tips and information

-

Symbol for a required action

The warning notes are classified in accordance with the severity of the

possible danger using the following warning signs and signal words.

Warning

symbol

Signal

word

Explanation

a

Danger

Imminent danger to life or risk of severe personal

injury

e

Danger

Risk of death from electric shock

a

Warning Risk of minor personal injury

Caution

Risk of material or environmental damage

1.2

Storing documents

- Pass these installation instructions and all other applicable

documents to the system operator.

The system operator should retain these instructions and tools so that
they are available when required.

2

Safety instructions and regulations

2.1

Intended use

The Glow-worm collecting container for solar use has been constructed

using state-of-the-art technology in accordance with the recognised

safety rules and regulations. Nevertheless, there is still a risk of injury

and death to the user or others, or of damage to the unit or other property

in the event of improper use for which it is not intended. Children must be

supervised to ensure that they do not play with the unit.

The Glow-worm collecting container is specially designed for the

operation of Glow-worm solar energy systems with hot water generation

and heating support. The Glow-worm solar energy system is used as a

solar energy system for solar heating support or hot water generation.

The components in the solar circuit have been developed for use with

Glow-worm solar fluid.

Any other use that is not specified in these instructions, or use beyond

that specified in this document, shall be considered improper use.

Any direct commercial or industrial use is also deemed as improper. The

manufacturer/supplier is not liable for any claims or damage resulting

from improper use. The user alone bears the risk.

Intended use includes the following:

- observance of accompanying operating, installation and servicing

instructions for Glow-worm products as well as for other parts of

components of the system

- compliance with all inspection and maintenance conditions listed in

the instructions.

2.2

Regulation and statutory requirements

2.2.1

Installation and settings

Installation, settings and maintenance and repairs to the collecting

container must only be carried out by a recognised competent person

who also assumes the responsibility for installing the unit properly and

commissioning it for the first time.

We accept no liability for any damage caused by failure to observe these

instructions.

Install the collecting container as described in this installation

manual.

2.2.2

Risk of scalding from hot solar fluid

Hot solar fluid may suddenly escape through the triggered expansion

relief valve.

Ensure that no one is put at risk from escaping hot solar fluid.

Install a temperature-resistant discharge line from the expansion relief

valve to the collecting container.

Route the discharge line so that it slopes down to the collecting

container.

To secure the collecting container to the wall, use suitable wall plugs

and bolts.

Always wear protective clothing (protective goggles and gloves) when

handling solar fluid.

Avoid any contact with skin.

2.2.3

Risk of poisoning and chemical burns

Incorrect handling of chemicals may result in poisoning and chemical

burn injuries.

Handle chemicals with care.

Observe the safety information regarding the solar fluid.

2.2.4

Damage caused by improper use and unsuitable tools

Use for which the container is not intended may lead to damage (e.g.

water discharge)!

In order to prevent leaks tighten or loosen threaded connections,

with a suitable open-ended spanner - do not use pipe wrenches,

extensions, etc. Incorrect installation may result in leaks.

Do not suspend any loads from the pipework (e.g. clothing).

2.2.5

Regulations

Observe the national regulations, standards, guidelines and laws.

Advertising