Glow-worm Climapro2 RF - Manual (Page 17)

0020094580_01 - 08/10 - Glow-worm - 15 -
HOW TO USE YOUR CLIMAPRO
2
RF
6.9.4 Programming hot water heating
Factory setting:
Monday to Friday
Nº of time
slot
Start Fin Activate
1 00:00 06:30 OFF
2 06:30 22:00 ON
3 22:00 00:00 OFF
Saturday
Nº of time
slot
Start Fin Activate
1 00:00 07:00 OFF
2 07:00 22:00 ON
3 22:00 00:00 OFF
Sunday
Nº of time
slot
Start Fin Activate
1 00:00 07:00 OFF
2 07:00 22:00 ON
3 22:00 00:00 OFF
• Press > then select > hot water >
program > define> select a day on the
screen
To set an operating time slot:
Programming for a day begins at 00:00 with a
maximum of 7 time intervals over 24 hours.
• Activate or desactivate water heating
with the buttons and validate with
button .
• Define the end of the time interval with
the buttons and validate with the
button.
• Begin the programming operations
again if you wish to add other time
intervals.
To modify a setting:
• Use the buttons (go back) or
(go forward) to highlight the
setting in question.
• Change the water heating setting or
a time by pressing buttons and
validate with the button.
To delete a time interval:
Deletion is performed:
- time interval by time interval,
- from the last time interval to the first.
• Use the button to highlight the
last time interval that was set.
• Use the button to display .
The display automatically goes to
and deletes the programmed setting.
The setting for the previous time interval
then applies up to .
• Validate with the button or
delete another time interval.
To delete another time interval:
• Use the button to highlight the
previous time interval and perform the
action again.
Copy a day
This function allows you to copy a
program from one day to other days.
This allows the selected day to be copied:
- to a day of the week
- to weekdays (Monday to Friday)