Glow-worm Climapro2 RF - Manual (Page 23)

0020094580_01 - 08/10 - Glow-worm - 21 -
HOW TO USE YOUR CLIMAPRO
2
RF
If enabled, it will be possible:
Buttons Description
To override the cooling program.
To access the override menu
if more than one program is
enabled (cooling and hot water).
To cancel the override enabled in
the cooling program.
To access the override cancel
menu if more than one override is
enabled (cooling and hot water)
(see override menu).
6.10.5 Setting the temperature
This function allows you to set the desired
temperature. The system automatically
changes the setting in accordance with the
weather conditions if the wireless outdoor
sensor is installed.
Temperature setting values (° C)
minimum 24
recommended 24
maximum 30
• Press the button and select >
cooling > temperature on the screen .
• Increase or decrease with the buttons
to display the initial cooling
temperature and press the button
.
6.11 Holiday
Menu This menu lets you:
Configure a period of
absence
Enable or disable the
absence period
6.11.1 Configuring a period of
absence
• Press the button and select >
holiday> set up on the screen
• Set the start and end your absence
(day and time) by pressing and
pressing the button to confirm.
• Remember to adjust the room
temperature by pressing and
pressing the button to confirm.
The suggested temperature during an
absence is:
- 12° C if the heating is turned on,
- 5° C if the heating is turned off.