Glow-worm Climapro2 RF - Manual (Page 26)

0020094580_01 - 08/10 - Glow-worm - 24 -
HOW TO USE YOUR CLIMAPRO
2
RF
6.12.5 Enable or disable automatic
keypad lock
This feature allows you to turn the keypad
lock on or off. Locking occurs when the
room thermostat enters standby.
• Press the button and select >
parameters > lock keypad on the
screen
• Press to highlight your choice
(activate or deactivate) and press the
button to confirm.
Display on main screen:
If enabled, it will be possible:
Buttons Description
To temporarily unlock the keypad
by pressing the button for 3
seconds.
To permanently disable the automatic
keypad lock
• Disable the automatic keypad lock
before the thermostat enters standby
again.
6.12.6 Screen
• Press the button and select >
parameters > screen > on the screen
• Press to highlight your choice
(brightness or contrast) and press
to confirm.
• Adjust your screen by pressing
and press the button to
confirm.
6.12.7 Return to factory settings
• Press the button and select >
parameters > reset on the screen
The resetting of factory
settings is irreversible. Any
customised configuration of
the room thermostat will be
lost.