GoDEX EZPi1000 series - Manual (Page 11)

EZPi1000 User Manual
7
2. Printer setup
This printer supports the following printing methods:
Thermal transfer
printing (TTP)
Requires a ribbon for transferring a printed image to a medium.
Direct thermal
printing (DTP) Does not require a ribbon, only thermal paper.
Please check which printing method you are using and alter the settings accordingly in
the printer driver, printer menu, and/or software.
2-1. Loading the ribbon
1. Place the printer on a
flat surface. Open
the printer cover by
pressing the release
buttons on both sides
of the printer housing
and lift the cover.
2. Release and lift the
print mechanism.
3. Remove the ribbon
hub
at the back.
4. Place the ribbon on
the hub at the back
and replace the
ribbon hub.