GoDEX EZ2250i series - Manual (Page 57)

53
6
Maintenance and Adjustment
6.2 Adjusting the print line
Please contact your local
dealer for technical support.
1. Open the printer cover.
2. Pull out the print head
release lever as shown in
the illustration (1) and
turn it anticlockwise to a
top right position (2).
3. TPH print line adjustment:
 When printing is slow or
when printing on thick
label stock, the print line
must be moved to the
front (in paper feed
direction) for a better
print result. Using a
flat-head screwdriver,
turn the screws
clockwise to move the
TPH forward.
 The two screws on the
left and right must be
adjusted to the same
position to ensure the
print line and feed roller
are in parallel.
 One turn of the screw
moves the print head by
0.5 mm. To keep track of
the change in quality,
you should adjust the
screws by ¼ turn at a
time.
 If no improvement is
visible, gently turn the
screws clockwise as far
as possible, then restart
the adjustment process
from there.
A