Grandview LF-HMF(Horizontal Adjustable Fixed-Frame Screen) - Manual (Page 2)

1
please prevent screen from wet place to avoid electric or fire danger
1. Please read carefully with this instructions before installation to avoid the damage caused by inappropriate
installation or operation
2. Please keep the screen away from hot sources, such as radiator, heating machine, fireplace, loudspeaker
or other relative device.
3. Please handle the repair work to the professional agent
4. Please prevent screen from water as well as putting stuff with water (such as vase) on the screen.
5. Please make sure which one is front or back of product.
6. Please put down the screen carefully because of the aluminum alloy frame.
7. Please cover the screen by cloth if it is not being used for a long time.
8. Please do not poke screen fabric with hand or edge tools to avoid marking on the screen surface.
Warnings:
Caution
Cleaning
Clean the casing of screen with a soft cloth and lukewarm water.
Do not use any detergent or cleaning products.
Please follow the instruction to operate.
Please contact the professional people for repairing.
4.After hanging on the bracket, please adjust the screen horizontally and ensure the hole of hanging piece and the
holes of low bracket is at the same level, and then fasten the security fixing screws into the holes (figure 15-16)
figure 15 figure 16
Top Bracket
Security Fixing Screw
Frame
Hanging Piece
Low Bracket
Security Fixing Screw
Frame
Hanging Piece
G roo
ve
figure 13 figure 14
3.Buckle the hanger of concave frame bar on top and low bracket, figure 13-14.
Please follow the installation as below:
a.Wood wall installation: fix the top and low bracket on the wall using the 5X60mm wood screw (3 screws on
each bracket) (figure 11).
b.Concrete wall installation: drill six proper holes on the concrete wall with electric drill, then fix the top and low
bracket on the wall using the 5X40mm tapping screw and then fasten with the anchor (3 screws on each bracket)
(figure 12).
figure 11 figure 12
6