64 20. glossary of terms – Dream Vision DM 7000-S User Manual

Page 64

Advertising
background image

RGB

Red, Green, Blue. Colour model in which the colour is defined by the propor-

tions of red, green and blue. Other colour models: CMY, HSV, HLS. Also the

name for a particular monitor signal, since monitors have electron beams for

red, green and blue, and can thus be directly controlled.

RS232

A widely used interface between computers and other serial devices such as

modems, printers and mice. Software updates can be fed in over the RS232

connection (for Windows computers, the COM interface).

Scart

21-pole cable connection for pcture and sound transmission, for example

from the satellite receiver of video recorder to the television. The usual con-

nection between television and video recorder, it is also used to connect the

set-top box with both of these units. Picture and sound can be placed back

and recorded in this way.

Smartcard

Similar to a credit card, used with the CA module of the set-top box, it makes

possible participant identification and access control for an encrypted Pay-TV

or TV channel.

SNR

Signal to Noise Ratio.The difference between the signal level and the noise on

an information channel..

SCPC

Single Channel Per Carrier – transmission system (digital or analog) which

uses a separate carrier for each each channel on a transponder (see also

MCPC).

S/PDIF

Sony/Philips Digital Interface Format. Definition of an interface and a protocol

for digital audio data, used in consumer equipment.

Symbolrate

Parameter for digital reception. Represents the data transmission rate for an

MCPC or SCPC signal, and is stated in Megasymbols per second (MS/s). The

symbol rate represents the speed with which data is transmitted. The receiver

must synchronise itself to this speed. MCPC channels usually operate with a

symbol rate of 27,500, and SCPC channels with symbol rates between 4,000

and 7,000.

64

20. Glossary of terms

20. Glossary of terms

Advertising