Hall Research UHBX-SW3-WP - Manual (Page 17)

15
© Copyright 2015. Hall Research, Inc.
All rights reserved.
UHBX-SW3-WP
Appendix 1 - Serial Commands in Slave Mode

Power :
Command: PWn <cr> Stands for Power On
Response: PWn <cr> Where n = 0 - 1 = Power Off - On

Auto Power :
Command: APn <cr> Stands for Auto Power
Response: APn <cr> Where n = 0 - 2 = Auto Power Off – On – On Lock

Input Select :
Command: ISn <cr> Stands for Input Select
Response: ISn <cr> Where n = 1 - 3 = HDMI1 - HDMI2 - VGA

Auto Input :
Command: AIn <cr> Stands for Auto Input
Response: AIn <cr> Where n = 0 - 2 = Auto Input Off – On – On Lock

Off Delay :
Command: ODn <cr> Stands for auto Off Delay
Response: ODn <cr> Where n = 0 - 60 (in minutes)

Switch Priority :
Command: SPn,m <cr> Stands for input Switching Priority
Query: SPn <cr>
Response: SPn,m <cr> Where n = 1 - 3 = HDMI1 - HDMI2 - VGA
(m = 1 - 3 (highest - lowest priority level)

Operation Mode :
Command: OMn <cr> Stands for Operation Mode
Response: OMn <cr> Where n = 0 - 1 = Master – Slave

Low Power :
Command: LP <cr> Stands for Low Power
Response: LPn <cr> Where n = 0 -1 = Normal – Low Power

Mute :
Command: MTn <cr> Stands for Mute LED
Response: MTn <cr> Where n = 0 -1 = Off – On