Hall Research UHBX-SW3-WP - Manual (Page 18)

Software Guide
16
© Copyright 2015. Hall Research, Inc.
All rights reserved.

VGA Auto Adjust :
Command: AA <cr> Stands for VGA Auto Adjust
Response: AA <cr>

VGA Aspect Ratio :
Command: ARn <cr> Stands for VGA Aspect Ratio
Response: ARn <cr> Where n = 0 - 1 = (4:3) – (16:9)

VGA Brightness :
Command: BNn <cr> Stands for VGA Brightness
Response: BNn <cr> Where n = 0 -100

VGA Color :
Command: CLn <cr> Stands for VGA Color
Response: CLn <cr> Where n = 0 -100

VGA Contrast :
Command: CTn <cr> Stands for VGA Contrast
Response: CTn <cr> Where n = 0 -100

VGA Input Configure (Mode) :
Command: ICn <cr> Stands for VGA Input Configure
Response: ICn <cr> Where n = 1 - 3 = VGA – Component – Audio only

VGA Left to Right (Horizontal Flip) :
Command: LRn <cr> Stands for VGA Left to Right
Response: LRn <cr> Where n = 0 -1 = Normal - Reversed

VGA Output Scale :
Command: OSn <cr> Stands for VGA Output Scaling
Response: OSn <cr> Where n = 0 -1 = 720p – 1080p

VGA Top to Bottom (Vertical Flip) :
Command: TBn <cr> Stands for VGA Top to Bottom
Response: TBn <cr> Where n = 0 -1 = Normal - Reversed

VGA Underscan (Zoom) :
Command: USn <cr> Stands for VGA Underscan
Response: USn <cr> Where n = 1 - 6