Denon AVR-785 - Manual (Page 51)

Dolby Digital mode (only with digital input) and DTS Surround (only with digital input)
1 Select the input source.
q Select an input source set to digital (COAXIAL/OPTICAL)
(see page 26).
INPUT MODE
(Main unit) (Remote control unit)
w Set the input mode to “AUTO” or DTS.
2 Select the STANDARD (Dolby/DTS Surround) mode.
(Remote control unit)
4
Play a program source with the , mark.
• The Dolby Digital indicator lights when
playing Dolby Digital sources.
DIGITAL
Light
2 3 2 2, 7 5, 6
1 1 4 3
5, 6
3
7
6
7
1
1
8
2
6
Playback with a digital input
• The DTS indicator lights when playing
DTS sources. Light
Example: DVD
FUNCTION
(Main unit) (Remote control unit)
STANDARD
(Main unit)
When performing this operation from the main unit’s panel,
press the SURROUND MODE button, then turn the SELECT
knob and select Dolby Pro Logic
II x or DTS NEO:6.
SELECT
SURROUND
MODE
(Main unit)
Operate the SURROUND BACK button to switch Surround
Back CH ON/OFF.
(Remote control unit)
SURROUND
BACK
(Main unit)
• Lights when the SURROUND BACK button is on.
(Main unit)
SURROUND
BACK
Light
3
51
ENGLISH