Denon AVR-785 - Manual (Page 56)

1 Turn the SELECT knob to select the surround mode.
SELECT
(Main unit)
• When turned clockwise
2 Press the SURROUND PARAMETER button.
Press and hold in the surround parameter button to select the parameter you want to set.
• The parameters which can be set differ for the different surround modes. (Refer to “Surround Modes and Parameters” on page 57.)
DIRECT STEREO DOLBY PRO LOGIC II x 5CH/7CH STEREO MONO MOVIE
JAZZ CLUB ROCK ARENA VIDEO GAME MATRIX VIRTUAL SURROUND
DTS NEO:6
DIRECT STEREO DOLBY PRO LOGIC II x 5CH/7CH STEREO MONO MOVIE
JAZZ CLUB ROCK ARENA VIDEO GAME MATRIX VIRTUAL SURROUND
DTS NEO:6
• Operating the surround mode and surround parameters from the main unit‘s panel.
1, 3 2 1
• When turned counterclockwise
To select the surround mode while adjusting the surround parameters, tone defeat or tone control, press the SURROUND MODE
button then operate the selector.
SURROUND
MODE
(Main unit)
SURROUND
PARAMETER
(Main unit)
3 Display the parameter you want to adjust, then turn the SELECT knob to set it.
Surround parameters e
ROOM SIZE:
This sets the size of the sound field.
There are five settings: “small”, “med.s” (medium-small), “medium”, “med.l” (medium-large) and “large”. “small” recreates a small sound
field, “large” a large sound field.
EFFECT LEVEL:
This sets the strength of the surround effect.
The level can be set in 15 steps from 1 to 15. Lower the level if the sound seems distorted.
DELAY TIME:
In the matrix mode only, the delay time can be set within the range of 0 to 110 ms.
NOTE:
• When making parameter settings, the display will return to the regular condition several seconds after the last button was pressed and
the setting will be completed.
56
ENGLISH