Denon AVR-785 - Manual (Page 59)

Press the TUNING • (+) or ª (–) button to tune in the desired
station.
The frequency changes continuously when the button is held
in.
Auto tuning
3 Press the MODE button to set the auto tuning mode.
Lit
4 Press the TUNING • (+) or ª (–) button.
ª TUNING •
• Automatic searching begins, then stops when a station is
tuned in.
NOTE:
• When in the auto tuning mode on the FM band, the “STEREO”
indicator lights on the display when a stereo broadcast is tuned in.
At open frequencies, the noise is muted and the “TUNED” and
“STEREO” indicators turn off.
2 4 1
Manual tuning
1 Set the input function to “TUNER”.
2 Watching the display, press the BAND button to select the
desired band (AM or FM).
3 Press the MODE button to set the manual tuning mode.
Check that the display’s “AUTO” indicator turns off.
4
NOTE:
• When the manual tuning mode is set, FM stereo broadcasts are received in monaural and the “STEREO” indicator turns off.
3
1
4
2
(Remote control unit)
(Remote control unit) (Main unit)
1 Set the input source to “TUNER”.
FUNCTION
(Main unit) (Remote control unit)
2 Watching the display, press the BAND button to select the
desired band (AM or FM).
BAND
(Main unit) (Remote control unit)
59
ENGLISH