Dell 800F - Manual (Page 11)

Dell
®
800F Series, 828FI Monitor User’s Guide 1-5
Adjusting Your Monitor
Your computer monitor allows you to easily adjust the characteristics of the image being
displayed. All of these adjustments are made using the control buttons on the front of the
monitor. While you use these buttons to adjust the controls, an on-screen menu shows
you their numeric values as they change.
1. The MENU / EXIT button opens and closes the on-screen menu.
2. The −−−− /+ buttons allow you to select and adjust items in the menu. When the
menu is not displayed, these buttons directly adjust the brightness and
contrast.
3. The button activates the function highlighted on the on-screen menu.
WARNING: Holding in this button for longer than 5 seconds erases all data in
the User Settings memory.
Automatic Save
Whenever you open the on-screen menu and allow an adjustment window to remain
on-screen for about three seconds without pressing another button, this monitor automati-
cally saves any adjustments you have made. These changes are saved into a user area in
the monitor. User areas are reserved according to the signal frequency from your com-
puter. This monitor can save adjustments for up to eight user modes. It has eight factory
preset or preload modes, one for each signal frequency as listed in the “Preset Timing
Modes” on page 13.
If you have made no adjustments the on-screen menu disappears and the monitor does
not save anything.
To exit without saving the changes you have made, press the MENU / EXIT button before
the three seconds elapse.
– +
MENU
EXIT
② ③ ①
E828fiW.book Page 5 Thursday, July 2, 1998 7:51 PM