Dell 800F - Manual (Page 17)

Dell
®
800F Series, 828FI Monitor User’s Guide 1-11
Color is not uniform
•
Activate the Degauss feature using the OSD DEGAUSS
menu
•
Adjust the color settings using the OSD COLOR menu.
White does not look
white
•
Activate the Degauss feature using the OSD DEGAUSS
menu.
•
Adjust the color settings using the OSD COLOR menu.
The colors are distorted
with dark or shadowed
areas
•
Activate the Degauss feature using the OSD DEGAUSS
menu
•
Adjust the color settings using the OSD COLOR menu.
Screen image is not cen-
tered or sized properly
•
Adjust the Horizontal and Vertical position settings And
/ or the Height and Width settings using the OSD.
Edges of the image are
curved
•
Adjust the shape of the display using the OSD
ADVANCED menu.
Wavy or elliptical (moiré)
pattern is visible
•
Clear the moiré pattern using the OSD V-MOIRE menu
The power indicator is
blinking green
•
lThe monitor is using its power management system.
Check the power management utility on your
computer.
The image is too light or
too dark
•
Adjust the Brightness and Contrast settings using the
OSD menu.
Cannot adjust monitor
with the buttons on the
front panel
•
Please contact Dell customer service.
White lines show red or
blue shades at the edges
•
Check surroundings for magnetic fields.
•
Perform monitor reset.
Picture is fuzzy
•
Perform monitor reset.
•
Eliminate accessories (i.e., Video extension cables).
Table 1-3. Troubleshooting Problems (continued)
Symptom Corrective Actions
E828fiW.book Page 11 Thursday, July 2, 1998 7:51 PM